ipsecAddressType
From QA Cafe Support Wiki
| ipsecAddressType | This option should be set to private if the IPSEC pass through mechanism works with the private IP address on the LAN side of the router. If the IPSEC pass through mechanism works with the public IP address on the LAN side, this option should be configured to public. Note: Since most IPSEC pass through mechanisms support IPSEC pass through using the private LAN address, this entry should usually be set to ‘private’. If the router requires a DMZ type setup in order to work with IPSEC, this entry can be set to ‘public’. |
Values: private | public | |
| Example: testvar ipsecAddressType private |