ikeNatTraversal
From QA Cafe Support Wiki
| ikeNatTraversal | Enables CDRouter-IKE to use NAT-Traversal. This must be configured to the specific version of NAT-T to use or “no” if NAT-T should not be used. The following values are supported: draft-00 draft-02 draft-03 rfc-3947 no When NAT-T is enabled, CDRouter-IKE will also run the ike-natt.tcl module when selected. This module is skipped when ikeNatTraversal is set to |
Values: no | draft-00 | draft-02 | draft-03 | rfc-3947 | |
| Example: testvar ikeNatTraversal no |