IPv4HopCount
From QA Cafe Support Wiki
| IPv4HopCount | This parameter specifies the IPv4 hop count, which is normally set to 1. However, CDRouter can also be used to test through a network that contains additional IPv4 devices that change the hop count. The parameter should be adjusted to the expected number of hops between CDRouter's LAN and WAN test interfaces. Please see Chapter 5 of the CDRouter User's Guide for more information on end-to-end testing through networks with multiple routers on the WAN, including DHCP-relay setups. |
Values: decimal | |
| Example: testvar IPv4HopCount 1 |